Maize / Corn Peeler & Thresher – Heavy-Duty, 2 HP Required, 1200 kg/hr

This heavy-duty Maize/Corn Peeler & Thresher delivers fast peeling and clean kernel separation with minimal loss. With a high 2800 RPM shaft speed and optimized chamber, it’s ideal for farms, FPOs and custom-hiring centers seeking higher throughput and lower labor cost.

Product Specifications

Key Features & Benefits

• High throughput: Up to ~1200 kg/hour for rapid post-harvest processing.
• Peel + thresh in one pass: Saves time and handling effort.
• Clean grain, low loss: >99% threshing with ≤0.1% loss under proper conditions.
• Efficient drive: Runs on a 2 HP motor; ~2 units/hour consumption.
• Compact & portable: Small footprint; easy to reposition on farm.

Best Suited For

• Small to mid-sized farms, FPOs/SHGs, custom-hiring centers.
• On-farm value addition and quicker market turnaround.

Operating Tips

• Use dried or semi-dry cobs to reduce kernel damage and improve separation.
• Maintain a steady feed rate—avoid overloading the hopper.
• Clean sieves and discharge chutes periodically to sustain capacity.
• Mount on a level surface; use proper wiring, earthing and MCB protection.

Frequently Asked Questions (FAQs)

Q1. Is the motor included?
Generally supplied without a motor. It requires a 2 HP, 220 V, 50 Hz single-phase motor.

Q2. What output can I expect?
Approximately 1200 kg/hour in typical conditions. Throughput varies with cob moisture, grain maturity, and feed rate.

Q3. Can I run it on domestic single-phase power?
Yes. Ensure correct cable sizing, earthing and a suitably rated MCB by a qualified electrician.

Q4. How do I minimize kernel breakage?
Use sufficiently dried cobs, keep a consistent feed, avoid overloading and clean screens regularly.

Q5. What is the actual power usage?
About 2 units (kWh) per hour depending on load and motor efficiency.

Q6. Can it process grains other than corn?
It’s optimized for maize/corn peeling and threshing. Use for other grains only if compatible settings/attachments are recommended by the seller.

Q7. What maintenance is required?
Post-use cleaning, periodic bearing lubrication, belt tension checks and inspection of guards/fasteners.

Q8. Is it easy to move?
Yes. The compact frame (~17 kg without motor; ~30 kg with motor) is manageable with basic handling equipment.

Note

Performance depends on crop condition and operating practice. Verify motor specifications and installation with a qualified electrician.

Disclaimer

All information is for reference. Follow the product manual and local electrical safety codes for installation and use.